Portable Compressor Foam & Fog Unit w/ Kalrez seals and 100' twin line by Foam-it
Features
- Draws from pre-mix solution
- Powered by 120 VAC electricity
- 100 ft. (7.6 m) twin-line tubing for convenient use
- Foam Gun with 65 degree fan tip for increased coverage
- Fog Gun for ultra fine fogging
- On-board compressor
- Compact design
Requirements
LIQUID TEMPERATURE RANGE - 40-100˚F (4.4-37˚C)
ELECTRICAL REQUIREMENTS - 120 VAC at 60 Hz, 10 amps (GFCI protected outlet)
OPERATING VOLTAGE - 120
VACCHEMICAL COMPATIBILITY - Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Specs
POWER TYPE - Electricity
CHEMICAL PICKUP TYPE - Draws from pre-mixed solution
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) - One product
SUCTION LINE LENGTH/DIAMETER - 6 ft. (1.8 m) hose with 1/4 in. (6.4 mm) inside diameter)
DISCHARGE HOSE DIAMETER/LENGTH - 25 ft. (7.6 m) coiled twin-line tubing, with 1/4 in. (6.4 mm) outside diameter
DISCHARGE WAND/TIP TYPE - Polypropylene trigger handle with 65˚ fan tip
OUTPUT DISTANCE - 4-6 feet (1.2-1.8 m)
OUTPUT VOLUME - 6 gal/min (22.7 l/min) of foam
FLOW RATE - *1 gal/min (3.8 l/min)
PUMP SEALS - Santoprene, Viton, or Kalrez
See link below for video support regarding this machine:
https://foamit.com/video/how-to-adjust-the-wet-dry...