Botanical Disinfectant Solution (5 gal. pail) Antimicrobial by Bioesque
BIOESQUE BOTANICAL DISINFECTANT SOLUTION CAN BE USED AGAINST
SARS-CoV-2 COVID-19 (Coronavirus Disease 2020)
Bioesque Botanical Disinfectant Solution has demonstrated effectiveness against
viruses similar to Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) on
hard non-porous surfaces. Therefore, Bioesque Botanical Disinfectant Solution can
be used against SARS-CoV-2 when used in accordance with the directions for use
against Norovirus (Feline Calicivirus surrogate) on hard, non-porous surfaces. Refer to
the CDC website at https://www.cdc.gov/coronavirus/index.html for additional
* To disinfect Norovirus, let stand for 4 minutes. Follow product label Directions for Use for detailed information.
Bioesque Botanical Disinfectant Solution is an EPA
registered Bleach-Free, Phosphate Free, Non-Corrosive
Disinfectant targeting broad spectrum efficacy. This
formula contains no harsh chemicals and does not
require any personal protection equipment. Safe for
everyday use, Bioesque Botanical Disinfectant is a
Ready to Use, patented formula. No rinse required –
even on food contact surfaces and NSF certified.
DIRECTIONS FOR USE:
TO DISINFECT: For use on hard nonporous surfaces. Spot test to
check compatibility with the surface. Spray to thoroughly wet the
surface to be disinfected. Surfaces must remain wet for 1 minute
to eliminate viruses*, 2 minutes to eliminate bacteria, 3 minutes
to eliminate fungi and M.bovis BCG (TB), and to disinfect
Norovirus, let stand for 4 minutes. Allow to air dry. If desired,
wipe dry. No rinse required, even on food contact surfaces.
TO SANITIZE: Spray to thoroughly wet the surface to be sanitized.
Surfaces must remain wet for 30 seconds on hard nonporous
surfaces and 2 minutes for soft surfaces.
TO CLEAN, DEODORIZE & REMOVE ALLERGENS§: Spray on
surface and wipe clean. To remove heavy soil let stand a few
minutes and wipe clean. For soft surfaces; spray to wet surface
and wipe or blot to clean. Always test an inconspicuous area first. § This product removes the following allergens: dust mite matter, cat dander, dog dander, mouse dander, rat
dander, guinea pig dander, cockroach matter, peanut, birch pollen, timothy grass pollen, rag weed pollen.
TO CLEAN VIA FOGGING: This product can be applied effectively
with a ULV fogger as a supplement to normal cleaning
procedures on restoration and remediation projects in confined,
vacant areas of schools, healthcare facilities, and in HVAC
systems as well other vacant, indoor areas. It is effective for precleaning or as a supplement to final cleaning. Do not dilute. This
product is ready-to-use in ULV foggers. Seal off doors and
windows in the area prior to fogging. After fogging, vacate the
treated area during the treatment interval as specified by the
device manufacturer, and do not re-enter the treated area until
all fog has settled or been exhausted. After the treatment
interval, ventilate the treated area until the air is purged of all
suspended product. Do not operate equipment in the fogged
area until the treatment is dry. When fogging as a pre-treatment,
follow the cleaning and disinfection procedures on the product label.
Bactericidal, Virucidal, Tuberculocidal, and Fungicidal